|Minimum Order Quantity
|Flow Rate Cubic Meters Per Hour
|"MARK" a division of ATLAS COPCO
MARK series elements
1. FPM seal ring blocks the air before and after filtering to achieve a better filtering effect.
2. The supporting layer adopts stainless steel to ensure the filter element strength and the layered filtration design guarantees the element filtering accuracy.
3. 96% porosity have strong capacity of holding dust, life span is up to 6000-8000hours, general pressure difference is 0.17 to 0.25kg/cm, no exceeding of 0.65kg/cm.
4. The element cover is made of PA+GF material, free from deformation from -20??? to 240??? under 1.8MPa pressure. Can also resist general acid and alkali chemical corrosion, withstand terrible compressed air environment, have extreme oleophobic and hydrophobic ability.
5. The inside and outside supporting layers are made of stainless steel to ensure the filter element strength, and protect the glass fiber during production process, at the same time avoid damage to filter element due to the rusty material, and secondary contamination of the compressed air.
6. The high quality special outer material of the element can condense the water and oil, avoid them to be blown away, further to achieve a better drying and filtering effect.7. Flow distributor on the upper side of the filter element, which can reduce turbulence and pressure drop, improve filtering performan